Le Cache Contemp 5200 Chocolate #741

• 622-bottle capacity with double-deep racking: 544 individual slots at 3 3/4-inch spacing fit standard Bordeaux and Burgundy formats as well as most oversized bottles; a separate bulk zone holds approximately 78 bottles stacked. All-wood interlock racks are included.
• SB/0™ Technology allows true zero rear clearance: The top-vent exhaust design lets the cabinet sit flush against a wall without any gap at the back - eliminating the need for alcove cutouts or standoff spacing in finished rooms. This is a meaningful placement advantage over rear-exhaust units.
• Foil-backed polyisocyanurate insulation: A closed-cell rigid foam with a higher R-value per inch than standard fiberglass, which limits thermal load on the cooling unit and reduces temperature recovery time when the door is opened frequently.
• Active humidity control, not passive: The cabinet independently manages both temperature and humidity. Most wine coolers and refrigerators regulate temperature only, which dries corks over multi-year aging. This system actively adjusts humidity to support long-term cellaring conditions.
• CellarPro cooling unit options: Choose between the 1800QT-HE and 1800XT-HE based on the room's thermal load. The 1800QT-HE is the quietest option. Review the Cooling Unit Selection Guide before ordering.
• Electronic thermostat with digital display; Energy-Saver and Quick-Chill operating modes; audible and visual alarms if temperature drifts outside range.
• Optional bottle probe available for spot temperature monitoring at a specific rack position.
• Security lock on both doors with stainless bar pulls; low-heat interior LED lighting; double-pane tinted glass provides UV filtering without blocking the view of the collection.
• 5-year warranty on the CellarPro cooling system; 2-year warranty on the full cabinet. An optional extended warranty is available separately.

Brand: Le Cache

UPC: 077757007415

Size: 74w x 29d x 86h (in)

Weight: 510 lbs

Capacity: 622 bottles
Double-Deep Storage
Racked Slots: 544 bottles (3 3/4-inch Slots)
Bulk Space: approximately 78 bottles (stacked)

Material: Cherry

Power/Rating:
115V AC / 60 Hz
Running / Startup Amps (compressor)
- CellarPro 1800QT-HE: 2.9 Amps / 20.1 Amps
- CellarPro 1800XT-HE: 3.0 Amps / 20.1 Amps
Thermal Load Calculations

Warranty:
2 Years (Cabinet) / 5 Years (Cooling Unit)
Optional Extended Warranty

What These Specs Mean

• Running vs. Startup Amps: Running amps reflect the unit's electrical draw during normal operation. Startup amps reflect the brief increase in current when the compressor starts. Refer to the cooling unit installation instructions for circuit requirements.
• Cooling Unit Options: The CellarPro 1800QT-HE is the quietest available option. Other compatible models provide additional cooling capacity for installations with higher thermal loads. Use the Cooling Unit Selection Guide to identify the correct model for the installation conditions.

Resources

• Owner's Manual
• Cooling Unit Selection Guide
• Placement Requirements
• Wine Cabinet Delivery & Inspection Instructions
• Wine Cabinet Filter: Top View
• Top View Drawings
• Adjustable Humidity Performance Chart
• Wine Cabinet Monthly Operating Cost
• Cooling Unit Sound Performance
• Interactive Product Demo

Watch Product Video

PLACEMENT & VENTILATION

Before choosing a location for your Le Cache wine cabinet, make sure the installation meets the following requirements.

BASIC PLACEMENT REQUIREMENTS

• Power: Standard grounded outlet on a dedicated circuit
• Room Temperature: 50–95°F
• Floor: Hard, level surface capable of supporting the fully loaded cabinet
• Door Clearance: Allow approximately 1 inch of additional width in front of the cabinet for the doors to open 90°
• Ventilation: Requirements vary depending on the cabinet and cooling configuration

VENTILATION REQUIREMENTS

Proper ventilation is essential. The cooling unit exhausts warm air, which must be able to dissipate without being drawn back into the unit. Poor ventilation can prevent the cabinet from reaching the desired temperature and may cause the cooling unit to overheat or run continuously.

SUMMARY

1. UPRIGHT CABINET / TOP-VENTED

Our upright wine cabinets with top-vented cooling are designed so the cabinet can be placed directly against the rear wall.

Warm air exhausts through the top of the cabinet, while return air enters from above. Sufficient clearance above and around the cabinet is therefore required.

Minimum clearance above the cabinet:

• 18 inches: Contemporary, Carolina, Loft, Vault and Semi-Custom wine cabinets
• 12 inches: European Country, Mission and Gallery wine cabinets

Important: The sides of the cabinet must remain open so that warm air can dissipate. Top-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

2. UPRIGHT CABINET / REAR-VENTED

Upright wine cabinets can also be configured with rear-vented cooling, with return air entering from behind the cabinet. This configuration is useful when sufficient clearance above the cabinet is not available.

Requirements:

• The cabinet must be positioned 3–4 inches away from the rear wall.
• If the rear of the cabinet is not accessible, allow at least 7 1/2 inches above the cabinet so the cooling-unit air filter can be removed and replaced.
• If the rear of the cabinet is accessible, allow at least 3 inches above the cabinet for airflow. We also recommend an air deflector to direct warm exhaust air to the left of the cabinet.

Important: The sides of the cabinet must remain open. Rear-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

3. UPRIGHT CABINET / TOP-VENTED + FRONT-VENT HOOD

A Front-Vent Hood can be added to a top-vented upright cabinet when:

• The cabinet will be placed flush against the rear wall but does not have the required clearance above for a standard top-vented installation
• The cabinet will be installed in an alcove, closet or other enclosed space

Allow at least 7 1/2 inches above the cabinet for removal of the hood and air filter.

Compatibility:

• Contemporary, Loft and Vault: The Front-Vent Hood may be used with or without the decorative grille.
• European Country, Mission, Carolina and Gallery: The Front-Vent Hood may be used without the decorative grille. The grille will not fit with the crown moldings.

4. CREDENZA

Credenzas do not require clearance above the cabinet; however, because both intake and exhaust ventilation occur behind the cabinet, credenzas require 3–4 inches of clearance behind the cabinet, and the sides must remain open for proper ventilation.

POWER REQUIREMENTS

The cooling unit plugs into a standard grounded wall outlet. The power cord extends approximately 6 1/2 feet from the rear of the cabinet.

The outlet must be on a dedicated circuit. The cooling unit components draw 3 amps, and the electrical outlet on the side of the cooling unit is also rated for 3 amps.

Do not share the circuit with another motor- or compressor-driven appliance such as a refrigerator, wine cooler, air conditioner or garage door opener.

We recommend using a surge protector rated for at least 15 amps to protect the cooling unit from power surges.

If an extension cord is necessary, use a grounded cord with 14-gauge wire or heavier, and keep it as short as possible.

FLOOR & WEIGHT REQUIREMENTS

A fully loaded wine cabinet is extremely heavy. Make sure the floor can support the combined weight of the cabinet and wine.

The cabinet should also be placed on a hard, level surface. On thick carpeting, the cabinet may settle unevenly over time, which can affect door alignment.

If installing on thick carpet, place a carpet board beneath the cabinet. You may purchase one from Le Cache or have a local hardware store cut a 3/4-inch plywood board to the width x depth of the cabinet.

DOOR SWING CLEARANCE

When opened to 90 degrees, the doors extend approximately 1 inch beyond the width of the cabinet.

For cabinets without moldings, allow for this additional space when planning the installation. The extra clearance is required in front of the cabinet for the doors to open fully.

Is the Le Cache Contemporary 5200 freestanding or can it be installed flush against a wall?

A: The 5200 is a freestanding cabinet that uses SB/0™ Technology, which means it can be placed directly flush against a wall without requiring clearance behind the unit. Exhaust vents through the top rather than the rear, so placement is flexible. At 74" wide x 29" deep x 86" tall and 510 lbs, it is best positioned on a level floor near a standard 115V outlet. It is not a built-in unit and does not require cabinetry surround or recessing.

What is the real bottle capacity, and will it fit oversized Burgundy or Champagne bottles?

A: The 5200 holds 622 bottles total — 544 in racked slots (3.8-inch slots with double-deep storage) and approximately 78 in bulk stacked space. The universal all-wood interlock racking is designed to accommodate oversized bottles, including large-format Burgundy and Champagne bottles that standard cooler racks often reject. If your collection skews toward larger formats, expect usable racked capacity to land somewhat below the 544 figure.

Does the 5200 actively manage humidity, and is it suitable for long-term aging?

A: Yes. Unlike wine coolers and refrigerators, which only control temperature, the 5200 includes adjustable humidity control through its CellarPro cooling unit. It maintains the humidity conditions required for long-term storage and aging — critical for preserving corks and preventing premature oxidation. Sealed seams, foil-backed polyisocyanurate insulation and double-pane tinted glass work together to stabilize the interior environment against ambient temperature and UV fluctuations.

What are the electrical requirements, and which CellarPro cooling unit should I choose?

A: The cabinet runs on a standard 115V AC / 60 Hz circuit. Three CellarPro cooling units are available: the 1800QTL-ECX (2.4A running / 14.2A startup), the 1800QT-ECX (2.9A running / 20.1A startup) and the 1800XT-ECX (3.0A running / 20.1A startup). The QTL draws the least current at startup, which matters if you’re sharing a circuit. The right unit depends on your room’s thermal load — ambient temperature, insulation and sun exposure all factor in. A thermal load calculator is available on the product page to guide the selection.

How is the cooling unit warranted, and what does the cabinet warranty cover?

A: The warranty is split: 5 years on the CellarPro cooling system and 2 years on the entire cabinet. An optional extended warranty is also available for buyers who want longer coverage. The cooling unit is manufactured in the USA by CellarPro, a dedicated wine cooling specialist — not a rebranded appliance compressor.

How does the Chocolate Cherry finish look in person, and what interiors does it pair with?

A: The Chocolate Cherry finish is a deep, dark espresso-toned stain over premium Cherry wood veneer with hardwood door and furniture trim. Images show a very dark, near-black brown exterior that reads more ebony than traditional cherry red. It pairs well with dark walnut millwork, black steel and contemporary interiors. The clean double-door silhouette with stainless bar pulls and arched glass windows fits modern, Craftsman, Deco and Asian-influenced rooms without appearing ornate.