Le Cache Euro 2400 Provincial #748

• CellarPro cooling unit options: Choose between the 1800QT-HE and 1800XT-HE based on the room's thermal load. The 1800QT-HE is the quietest option. Review the Cooling Unit Selection Guide before ordering.
• SB/0™ Technology: The cabinet is engineered to sit flush against a wall with zero side clearance required. Combined with top-vent exhaust, heat exits through the top rather than the sides or rear, which matters for built-in alcoves, dining rooms and finished basements where airflow is restricted.
• Active humidity management: Adjustable humidity control is built into the cooling system - not a passive tray. This distinguishes it from refrigerators and standard wine coolers, which cycle humidity down as they cool and are not suited for long-term cork integrity.
• Universal racking with 3 3/4-inch slots, double-deep configuration: Accommodates oversized Bordeaux, Burgundy and Champagne formats. 256 racked slots plus approximately 30 bottles of bulk stacking space for a total of 286 bottles.
• Foil-backed polyisocyanurate insulation: A closed-cell foam with higher R-value per inch than fiberglass or standard polyurethane, reducing thermal load on the compressor and improving long-term energy efficiency.
• Energy-Saver and Quick-Chill modes on the CellarPro unit allow you to reduce power draw during stable ambient conditions or drop temperature rapidly after loading new bottles.
• Audible and visual alarms alert to temperature excursions without requiring you to monitor the digital display.
• Security locks on both French doors; hand-turned pewter pulls are functional hardware, not decorative overlays.
• All-wood interlock racks, interior LED lighting and an optional bottle probe (for monitoring individual bottle temperature) are included or available as add-ons. Warranty covers 5 years on the cooling system and 2 years on the cabinet, with an optional extended warranty available.

Pairs Well With

• The optional bottle probe accessory, which lets you monitor actual wine temperature inside a stored bottle rather than relying solely on air temperature - useful when aging high-value bottles where small thermal variations matter.
• An optional extended warranty, particularly relevant given the cost of the CellarPro cooling unit and the long aging timelines this cabinet is designed to support.

Brand: Le Cache

UPC: 077757007484

Size: 44w x 31d x 88h (in)

Weight: 415 lbs

Capacity: 286 bottles
Double-Deep Storage
Racked Slots: 256 bottles (3 3/4-inch Slots)
Bulk Space: approximately 30 bottles (stacked)

Material: Cherry

Power/Rating:
115V AC / 60 Hz
Running / Startup Amps (compressor)
- CellarPro 1800QT-HE: 2.9 Amps / 20.1 Amps
- CellarPro 1800XT-HE: 3.0 Amps / 20.1 Amps
Thermal Load Calculations

Warranty:
2 Years (Cabinet) / 5 Years (Cooling Unit)
Optional Extended Warranty

What These Specs Mean

• Running vs. Startup Amps: Running amps reflect the unit's electrical draw during normal operation. Startup amps reflect the brief increase in current when the compressor starts. Refer to the cooling unit installation instructions for circuit requirements.
• Cooling Unit Options: The CellarPro 1800QT-HE is the quietest available option. Other compatible models provide additional cooling capacity for installations with higher thermal loads. Use the Cooling Unit Selection Guide to identify the correct model for the installation conditions.

Resources

• Owner's Manual
• Cooling Unit Selection Guide
• Placement Requirements
• Wine Cabinet Delivery & Inspection Instructions
• Wine Cabinet Filter: Top View
• Top View Drawings
• Adjustable Humidity Performance Chart
• Wine Cabinet Monthly Operating Cost
• Cooling Unit Sound Performance
• Interactive Product Demo

Watch Product Video

PLACEMENT REQUIREMENTS

POWER REQUIREMENT:
The power cord extends 6 1/2 feet from the rear of the cabinet. If an extension cord is used, it should be 14-gauge wire or thicker, grounded, and as short as possible.

The cooling unit plugs into a standard grounded wall outlet. We recommend adding a surge protector, rated at 15 amps or more (for example, click here), to protect the cooling unit from power surges.

The outlet must be on a dedicated circuit. The components of the cooling unit draw 3 amps, and the electric outlet on the side of the cooling unit also is rated for 3 amps. The cooling unit should not, under any circumstances, share a circuit with another motor or compressor-based appliance, like a wine cooler, fridge, air conditioner, or garage opener.

FLOOR SURFACE
Because of the significant weight of your wine cabinet, it is important that it be placed on a hard surface; otherwise, the cabinet may become skewed if the doors settle unevenly over time. If you will be placing your cabinet on thick carpeting, consider placing a carpet board underneath the wine cabinet. You can purchase a carpet board from Le Cache, or you can have your local hardware store cut a 3/4 inch plywood board to the following dimensions: 45w x 25d (inches).

DOOR SWING CLEARANCE
The doors of our wine cabinets swing wide by approximately 1 inch when open at 90 degrees. The additional width should be accounted for when purchasing cabinets that do not have moldings because the stated widths of our wine cabinets do not account for the door swing. Please note that the additional width is required in front of the cabinet.

WEIGHT LOAD FACTOR
After loading your wine cabinet with wine bottles, it will be extremely heavy. When selecting a location for your cabinet, make sure that the floor underneath is strong enough to support the weight of the cabinet.

TEMPERATURE REQUIREMENTS
CellarPro cooling units are designed to handle temperatures ranging from 50 to 95F.

VENTILATION REQUIREMENTS
The cooling unit generates hot air that must be exhausted in such a way that it won't be recirculated by the cooling unit. If the hot air cannot be dissipated or channeled properly, and the cooling unit is forced to recycle its own hot air, the cooling unit will be unable to maintain cold temperatures inside the wine cabinet and/or will overheat and/or will run all the time. Proper ventilation can be achieved in one of three ways:

1. UPRIGHT CABINETS WITH TOP-VENT CONFIGURATIONS
Our upright wine cabinets have been engineered with top-vent cooling units and SB/0 Technology so that they can be placed right up against the wall. In this configuration, the hot air generated by the cooling unit is ventilated through the top of the wine cabinet, and the return air comes from above the wine cabinet, so there must be clearance above and to the sides of the cabinets for the hot air to dissipate, as follows:

• Contemporary wine cabinets, Carolina wine cabinets, Loft wine cabinets, Vault wine cabinets and a Semi-Custom wine cabinets require 18 inches of clearance above the wine cabinet.
• European Country wine cabinets and Mission wine cabinets require 12 inches of clearance above the wine cabinet.
• The sides always need to be open - in other words, placement in a corner, enclosed space, alcove, or closet will not work without our front-vent hood (see Configuration 3 below).

2. UPRIGHT CABINETS WITH Rear-Vent Configurations
Our upright wine cabinets can be configured so that the return air comes from behind the wine cabinet. This configuration is useful in situations where sufficient clearance around the wine cabinet doesn't exist. In this configuration:

• If the rear of the wine cabinet is not accessible, a minimum clearance of 7 1/2 inches above the wine cabinet is required for removal and replacement of the cooling unit air filter.
• If the rear of the wine cabinet is accessible, a minimum clearance of 3 inches above the wine cabinet is required for proper airflow, and we recommend using our air deflector to direct the hot air exhaust to the left of the wine cabinet.
• In all cases, the wine cabinet must be placed 3-4 inches away from the rear wall.
• The sides always need to be open - in other words, placement in a corner, enclosed space, alcove, or closet will not work without our front-vent hood (see Configuration 3 below).

3. UPRIGHT CABINETS with Front-Vent Hoods
If you want to place the wine cabinet flush against the wall but you don't have the required clearance (as outlined in Configuration 1 above), or you want to place the wine cabinet in an enclosed space, closet, or alcove, our front-vent hood (placed on top of the wine cabinet) can be used with 7 1/2 inches of clearance above the wine cabinet for removal of the hood and the air filter. Please note:

• Contemporary wine cabinets, Loft wine cabinets and Vault wine cabinets can use our front vent hood with OR without the decorative grill.
• European Country wine cabinets, Mission wine cabinets and Carolina wine cabinets can use our front vent hood without the decorative grill (the decorative grill will not fit with crown moldings).

4. CREDENZA WINE CABINETS
Credenza wine cabinets don't require any clearance above the wine cabinet; however, all credenzas require 3-4 inches of space behind the wine cabinet because all the ventilation (intake and exhaust) occurs behind the cabinet.

Is the Le Cache Euro 2400 freestanding, or can it be placed flush against a wall?

A: The Euro 2400 is a freestanding cabinet but uses Le Cache's SB/0™ Technology, which allows it to sit flush against a wall without clearance gaps at the rear. Exhaust vents through the top of the cabinet, so no rear or side airflow clearance is needed. This makes it well-suited for dining rooms, living rooms or finished basements where you want a built-in look without a true built-in installation.

What are the electrical requirements, and do I need a dedicated circuit?

A: The cabinet runs on 115V AC / 60 Hz standard household current. Running amperage is low — the quietest CellarPro 1800QTL-ECX draws just 2.4 amps while running — but startup (compressor kick-in) amps are significantly higher: 14.2 amps for the QTL, up to 20.1 amps for the QT and XT models. A dedicated 20-amp circuit is strongly recommended to handle startup loads cleanly, especially if the outlet is shared with other appliances.

Does the 286-bottle rating hold up with larger Bordeaux or Burgundy bottles?

A: The 256 racked slots are sized at 3.8-inch spacing, which accommodates standard Bordeaux, Burgundy and most Napa Cabernet bottles. The universal all-wood interlock racking system is specifically designed to fit oversized bottles. The remaining 30-bottle bulk space is stacked rather than individually slotted, so heavier or irregularly shaped bottles can go there. Real-world capacity with a mixed cellar will be very close to the stated 286.

How does this cabinet manage humidity, and why does that matter for long-term aging?

A: Unlike standard wine coolers or refrigerators, the Euro 2400 includes adjustable humidity control through the CellarPro unit — not just temperature. Low humidity dries out corks, allowing oxygen into the bottle and accelerating premature aging. The cabinet's sealed seams, foil-backed polyisocyanurate insulation and double-pane tinted glass work together to maintain stable internal conditions, making it suitable for long-term aging of fine wines, not just short-term chilling.

How quiet is the CellarPro cooling unit in a living space?

A: Le Cache specifically markets this generation of Euro 2400 as featuring the most advanced and quietest CellarPro cooling units available. The 1800QTL-ECX runs at the lowest amperage draw (2.4 amps) and is the quietest of the three cooling unit options. Le Cache publishes detailed sound performance data at their website for buyers who want to compare decibel levels across cooling unit configurations before selecting one.

What does the warranty cover, and for how long?

A: The warranty has two separate terms: 2 years on the entire cabinet (woodwork, hardware, glass, racks) and 5 years on the CellarPro cooling unit. An optional extended warranty is also available for buyers who want coverage beyond those periods. The cooling unit being US-made and backed by a 5-year term is a meaningful differentiator — most wine cooler compressors in this price class carry only 1–2 year coverage.