Le Cache Contemp 2400 Driftwood #36426

• SB/0™ Technology: The top-vent exhaust design means the cabinet can sit flush against a wall with zero rear clearance required - a practical advantage in dining rooms, hallways or finished basements where space is measured carefully.
• Foil-backed polyisocyanurate insulation: Higher R-value per inch than standard foam, which reduces the thermal load on the cooling unit and helps maintain stable internal temperatures even in warmer ambient rooms.
• CellarPro cooling unit options: Choose between the 1800QT-HE and 1800XT-HE based on the room's thermal load. The 1800QT-HE is the quietest option. Review the Cooling Unit Selection Guide before ordering.
• Energy-Saver and Quick-Chill modes: Energy-Saver reduces compressor cycling during stable conditions; Quick-Chill accelerates temperature recovery after extended door access or initial setup.
• Audible and visual alarms alert to temperature excursions or door-ajar conditions. An optional bottle probe adds a second temperature reference point inside the cabinet.
• Universal all-wood interlock racks with 3 3/4-inch slots: Accommodates standard Bordeaux and Burgundy bottles as well as larger-format and oversized bottles without requiring separate rack inserts. Double-deep configuration maximizes capacity within the 39" footprint.
• Stainless bar pulls with keyed security lock on both doors
• 5-year warranty on the CellarPro cooling unit; 2-year warranty covering the full cabinet. Optional extended warranty available.

Pairs Well With

• The optional CellarPro bottle probe - recommended if the cabinet is placed in a room with significant temperature swings, as it gives you an internal wine-temperature reading independent of the thermostat sensor.

Brand: Le Cache

UPC: 077757364266

Size: 39w x 29d x 82h (in)

Weight: 385 lbs

Capacity: 286 bottles
Double-Deep Storage
Racked Slots: 256 bottles (3 3/4-inch Slots)
Bulk Space: approximately 30 bottles (stacked)

Material: Cherry

Power/Rating:
115V AC / 60 Hz
Running / Startup Amps (compressor)
- CellarPro 1800QT-HE: 2.9 Amps / 20.1 Amps
- CellarPro 1800XT-HE: 3.0 Amps / 20.1 Amps
Thermal Load Calculations

Warranty:
2 Years (Cabinet) / 5 Years (Cooling Unit)
Optional Extended Warranty

What These Specs Mean

• Running vs. Startup Amps: Running amps reflect the unit's electrical draw during normal operation. Startup amps reflect the brief increase in current when the compressor starts. Refer to the cooling unit installation instructions for circuit requirements.
• Cooling Unit Options: The CellarPro 1800QT-HE is the quietest available option. Other compatible models provide additional cooling capacity for installations with higher thermal loads. Use the Cooling Unit Selection Guide to identify the correct model for the installation conditions.

Resources

• Owner's Manual
• Cooling Unit Selection Guide
• Placement Requirements
• Wine Cabinet Delivery & Inspection Instructions
• Wine Cabinet Filter: Top View
• Top View Drawings
• Adjustable Humidity Performance Chart
• Wine Cabinet Monthly Operating Cost
• Cooling Unit Sound Performance
• Interactive Product Demo
• Watch Product Video

PLACEMENT & VENTILATION

Before choosing a location for your Le Cache wine cabinet, make sure the installation meets the following requirements.

BASIC PLACEMENT REQUIREMENTS

• Power: Standard grounded outlet on a dedicated circuit
• Room Temperature: 50–95°F
• Floor: Hard, level surface capable of supporting the fully loaded cabinet
• Door Clearance: Allow approximately 1 inch of additional width in front of the cabinet for the doors to open 90°
• Ventilation: Requirements vary depending on the cabinet and cooling configuration

VENTILATION REQUIREMENTS

Proper ventilation is essential. The cooling unit exhausts warm air, which must be able to dissipate without being drawn back into the unit. Poor ventilation can prevent the cabinet from reaching the desired temperature and may cause the cooling unit to overheat or run continuously.

SUMMARY

1. UPRIGHT CABINET / TOP-VENTED

Our upright wine cabinets with top-vented cooling are designed so the cabinet can be placed directly against the rear wall.

Warm air exhausts through the top of the cabinet, while return air enters from above. Sufficient clearance above and around the cabinet is therefore required.

Minimum clearance above the cabinet:

• 18 inches: Contemporary, Carolina, Loft, Vault and Semi-Custom wine cabinets
• 12 inches: European Country, Mission and Gallery wine cabinets

Important: The sides of the cabinet must remain open so that warm air can dissipate. Top-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

2. UPRIGHT CABINET / REAR-VENTED

Upright wine cabinets can also be configured with rear-vented cooling, with return air entering from behind the cabinet. This configuration is useful when sufficient clearance above the cabinet is not available.

Requirements:

• The cabinet must be positioned 3–4 inches away from the rear wall.
• If the rear of the cabinet is not accessible, allow at least 7 1/2 inches above the cabinet so the cooling-unit air filter can be removed and replaced.
• If the rear of the cabinet is accessible, allow at least 3 inches above the cabinet for airflow. We also recommend an air deflector to direct warm exhaust air to the left of the cabinet.

Important: The sides of the cabinet must remain open. Rear-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

3. UPRIGHT CABINET / TOP-VENTED + FRONT-VENT HOOD

A Front-Vent Hood can be added to a top-vented upright cabinet when:

• The cabinet will be placed flush against the rear wall but does not have the required clearance above for a standard top-vented installation
• The cabinet will be installed in an alcove, closet or other enclosed space

Allow at least 7 1/2 inches above the cabinet for removal of the hood and air filter.

Compatibility:

• Contemporary, Loft and Vault: The Front-Vent Hood may be used with or without the decorative grille.
• European Country, Mission, Carolina and Gallery: The Front-Vent Hood may be used without the decorative grille. The grille will not fit with the crown moldings.

4. CREDENZA

Credenzas do not require clearance above the cabinet; however, because both intake and exhaust ventilation occur behind the cabinet, credenzas require 3–4 inches of clearance behind the cabinet, and the sides must remain open for proper ventilation.

POWER REQUIREMENTS

The cooling unit plugs into a standard grounded wall outlet. The power cord extends approximately 6 1/2 feet from the rear of the cabinet.

The outlet must be on a dedicated circuit. The cooling unit components draw 3 amps, and the electrical outlet on the side of the cooling unit is also rated for 3 amps.

Do not share the circuit with another motor- or compressor-driven appliance such as a refrigerator, wine cooler, air conditioner or garage door opener.

We recommend using a surge protector rated for at least 15 amps to protect the cooling unit from power surges.

If an extension cord is necessary, use a grounded cord with 14-gauge wire or heavier, and keep it as short as possible.

FLOOR & WEIGHT REQUIREMENTS

A fully loaded wine cabinet is extremely heavy. Make sure the floor can support the combined weight of the cabinet and wine.

The cabinet should also be placed on a hard, level surface. On thick carpeting, the cabinet may settle unevenly over time, which can affect door alignment.

If installing on thick carpet, place a carpet board beneath the cabinet. You may purchase one from Le Cache or have a local hardware store cut a 3/4-inch plywood board to the width x depth of the cabinet.

DOOR SWING CLEARANCE

When opened to 90 degrees, the doors extend approximately 1 inch beyond the width of the cabinet.

For cabinets without moldings, allow for this additional space when planning the installation. The extra clearance is required in front of the cabinet for the doors to open fully.

Is the Le Cache Model 2400 freestanding or can it be recessed into a wall?

A: The Model 2400 is a freestanding cabinet designed to sit flush against a wall thanks to Le Cache's SB/0™ Technology, which routes all exhaust through a top-vent rather than out the rear. This means zero rear clearance is required — it can be pushed directly against a wall or placed between built-ins — but it is not a true built-in unit and does not require a cabinet cutout or ventilation chase.

What is the real-world bottle capacity, and does it handle larger-format or wide-shoulder bottles like Burgundy or Champagne?

A: Total capacity is 286 bottles: 256 racked slots at 3.8-inch spacing (double-deep) plus approximately 30 bottles in bulk stacking space. The universal all-wood interlock racks are designed to accommodate oversized bottles, including wide-shoulder Burgundy and Champagne formats, without requiring a rack reconfiguration.

Does this cabinet actively manage humidity, or does it only control temperature?

A: Unlike standard wine coolers or refrigerators, the Model 2400 includes Adjustable Humidity Control through the CellarPro cooling unit — actively maintaining the moisture levels needed for long-term aging and cork integrity. This is one of the core distinctions between a purpose-built wine cabinet and a repurposed beverage refrigerator, which typically over-dries the interior.

What are the electrical requirements and which CellarPro cooling unit should I select?

A: The cabinet runs on standard 115V AC / 60 Hz power. Three CellarPro 1800-series units are available: the 1800QTL-ECX draws 2.4 running amps (14.2 startup), the 1800QT-ECX draws 2.9 running amps (20.1 startup) and the 1800XT-ECX draws 3.0 running amps (20.1 startup). The right unit depends on the thermal load of your room — ambient temperature, insulation and sun exposure all factor in. Le Cache provides a Thermal Load Calculations guide to help match the unit to your specific environment.

What does the warranty actually cover and for how long?

A: The cabinet carries a 2-year full warranty and the CellarPro cooling unit is covered separately for 5 years. An optional extended warranty is also available for buyers who want longer coverage on the cooling system. The cooling unit warranty being the longer of the two reflects that the compressor is the highest-wear component in any active-cooling wine cabinet.

How loud is the Model 2400 in a living space like a dining room or open-plan area?

A: Le Cache specifies that the current generation uses the most advanced and quietest CellarPro cooling units available, and the 1800QTL-ECX variant in particular draws the lowest running amperage (2.4A) of the three options, which correlates with lower operational noise. The cabinet also features an Energy-Saver mode that reduces compressor cycling during stable ambient conditions. Le Cache publishes a detailed Cooling Unit Sound Performance chart for buyers who want decibel-level comparisons across the three unit options.