Le Cache Contemp 5200 Driftwood #36428

(1 Review)
SKU: 36428 A5200-Driftwood
This item is oversized and does not qualify for free Economy Ground shipping.
$8,795.00
In Stock

Typical Processing Time: 1-2 Weeks

AVAILABLE WOOD FINISHES
Driftwood
Driftwood
Cherry
Provincial
Provincial
Cherry
Classic
Classic
Cherry
Chocolate
Chocolate
Cherry

Details

When a serious collection outgrows a closet conversion or a single cooler, the Le Cache Contemporary 5200 in Driftwood is the answer — a full-scale aging environment in furniture form. At 622 bottles total across double-deep racked slots and bulk stacking space, it holds the kind of depth — multiple vintages of Bordeaux, a serious Burgundy allocation, Napa library bottles — that smaller units simply can’t accommodate. The Driftwood finish, a soft weathered gray-white on Cherry veneer, reads cleanly against both light and dark millwork, making it equally at home in a finished basement, a dining room or a second-home great room.

The cabinet is built around long-term aging, not just short-term chilling. Foil-backed polyisocyanurate insulation and sealed double-pane tinted glass protect against both temperature fluctuation and UV degradation. The CellarPro cooling unit — made in the USA and now available in its quietest ECX configuration — manages both temperature and humidity digitally, with adjustable humidity control, Energy-Saver and Quick-Chill modes and audible and visual alarms if conditions drift. SB/0® Technology allows the cabinet to sit flush against a wall with top-vent exhaust, eliminating the clearance and installation constraints that complicate most freestanding units. All-wood interlock racks hold standard and oversized bottles in 3.8-inch slots, and the interior LED keeps heat out of the equation when you’re pulling bottles.

Best For

  • Housing 300–600 bottles across multiple appellations with consistent aging conditions and without the overhead of a custom cellar build
  • Placing a high-capacity cabinet flush against a dining room or basement wall where rear clearance is limited
  • Collections that include large-format or oversized bottles that standard racking can’t fit
  • Situations where the cabinet will be visible — the Driftwood finish and arched glass doors are meant to be seen, not hidden

Features

  • SB/0™ Zero-Clearance Placement: Top-vent exhaust means the cabinet can sit flush against any wall with no rear gap required. If you're fitting this into a dining room alcove, finished basement or built-in niche, you won't lose floor space managing heat exhaust behind the unit.
  • CellarPro cooling unit options: Choose between the 1800QT-HE and 1800XT-HE based on the room's thermal load. The 1800QT-HE is the quietest option. Review the Cooling Unit Selection Guide before ordering.
  • Foil-backed polyisocyanurate insulation: Higher R-value per inch than standard foam insulation. Combined with sealed seams and tinted double-pane glass, this keeps internal temperature stable even in rooms with variable ambient conditions - important for long-term aging rather than short-term chilling.
  • Active humidity management: Adjustable humidity control goes beyond what a standard wine refrigerator offers. The digital thermostat tracks both temperature and humidity, and audible and visual alarms trigger if either drifts outside your set range.
  • Universal all-wood interlock racks: The 3 3/4-inch slots handle standard Bordeaux, larger Burgundy formats and oversize Champagne bottles without adapters. Total capacity is 622 bottles - 544 in racked slots and approximately 78 in bulk stacking space at the bottom.
  • Energy-Saver and Quick-Chill modes on the CellarPro unit allow you to reduce power draw during low-use periods or rapidly bring the cabinet down to temperature after a large restocking.
  • Stainless bar pulls with keyed security lock on both doors
  • Low-heat interior LED lighting; optional bottle probe available separately for more granular temperature monitoring inside the cabinet
  • Cooling unit carries a 5-year warranty; full cabinet carries a 2-year warranty. Optional extended warranty available.

Pairs Well With

  • The optional bottle probe - measures temperature at the bottle rather than the air, which is more relevant for aging decisions on long-term cellaring vintages.

Specs & Resources

Brand: Le Cache

UPC: 077757364280

Size: 74w x 29d x 86h (in)

Weight: 510 lbs

Capacity: 622 bottles
Double-Deep Storage
Racked Slots: 544 bottles (3 3/4-inch Slots)
Bulk Space: approximately 78 bottles (stacked)

Material: Cherry

Power/Rating:
115V AC / 60 Hz
Running / Startup Amps (compressor)
- CellarPro 1800QT-HE: 2.9 Amps / 20.1 Amps
- CellarPro 1800XT-HE: 3.0 Amps / 20.1 Amps
Thermal Load Calculations

Warranty:
2 Years (Cabinet) / 5 Years (Cooling Unit)
Optional Extended Warranty

What These Specs Mean

  • Running vs. Startup Amps: Running amps reflect the unit's electrical draw during normal operation. Startup amps reflect the brief increase in current when the compressor starts. Refer to the cooling unit installation instructions for circuit requirements.
  • Cooling Unit Options: The CellarPro 1800QT-HE is the quietest available option. Other compatible models provide additional cooling capacity for installations with higher thermal loads. Use the Cooling Unit Selection Guide to identify the correct model for the installation conditions.

Resources

Watch Product Video

Placement

PLACEMENT & VENTILATION

Before choosing a location for your Le Cache wine cabinet, make sure the installation meets the following requirements.

BASIC PLACEMENT REQUIREMENTS

  • Power: Standard grounded outlet on a dedicated circuit
  • Room Temperature: 50–95°F
  • Floor: Hard, level surface capable of supporting the fully loaded cabinet
  • Door Clearance: Allow approximately 1 inch of additional width in front of the cabinet for the doors to open 90°
  • Ventilation: Requirements vary depending on the cabinet and cooling configuration

VENTILATION REQUIREMENTS

Proper ventilation is essential. The cooling unit exhausts warm air, which must be able to dissipate without being drawn back into the unit. Poor ventilation can prevent the cabinet from reaching the desired temperature and may cause the cooling unit to overheat or run continuously.

SUMMARY

Configuration Minimum Clearance Behind Minimum Clearance Above Open Sides Required? Suitable for Alcove?
Upright Cabinet / Top-Vented — 12 inches or 18 inches Yes No
Upright Cabinet / Rear-Vented 3–4 inches 3 inches or 7 1/2 inches Yes No
Upright Cabinet / Top-Vented + Front-Vent Hood — 7 1/2 inches No Yes
Credenza 3–4 inches None required Yes No

1. UPRIGHT CABINET / TOP-VENTED

Our upright wine cabinets with top-vented cooling are designed so the cabinet can be placed directly against the rear wall.

Warm air exhausts through the top of the cabinet, while return air enters from above. Sufficient clearance above and around the cabinet is therefore required.

Minimum clearance above the cabinet:

  • 18 inches: Contemporary, Carolina, Loft, Vault and Semi-Custom wine cabinets
  • 12 inches: European Country, Mission and Gallery wine cabinets

Important: The sides of the cabinet must remain open so that warm air can dissipate. Top-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

2. UPRIGHT CABINET / REAR-VENTED

Upright wine cabinets can also be configured with rear-vented cooling, with return air entering from behind the cabinet. This configuration is useful when sufficient clearance above the cabinet is not available.

Requirements:

  • The cabinet must be positioned 3–4 inches away from the rear wall.
  • If the rear of the cabinet is not accessible, allow at least 7 1/2 inches above the cabinet so the cooling-unit air filter can be removed and replaced.
  • If the rear of the cabinet is accessible, allow at least 3 inches above the cabinet for airflow. We also recommend an air deflector to direct warm exhaust air to the left of the cabinet.

Important: The sides of the cabinet must remain open. Rear-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

3. UPRIGHT CABINET / TOP-VENTED + FRONT-VENT HOOD

A Front-Vent Hood can be added to a top-vented upright cabinet when:

  • The cabinet will be placed flush against the rear wall but does not have the required clearance above for a standard top-vented installation
  • The cabinet will be installed in an alcove, closet or other enclosed space

Allow at least 7 1/2 inches above the cabinet for removal of the hood and air filter.

Compatibility:

  • Contemporary, Loft and Vault: The Front-Vent Hood may be used with or without the decorative grille.
  • European Country, Mission, Carolina and Gallery: The Front-Vent Hood may be used without the decorative grille. The grille will not fit with the crown moldings.

4. CREDENZA

Credenzas do not require clearance above the cabinet; however, because both intake and exhaust ventilation occur behind the cabinet, credenzas require 3–4 inches of clearance behind the cabinet, and the sides must remain open for proper ventilation.

POWER REQUIREMENTS

The cooling unit plugs into a standard grounded wall outlet. The power cord extends approximately 6 1/2 feet from the rear of the cabinet.

The outlet must be on a dedicated circuit. The cooling unit components draw 3 amps, and the electrical outlet on the side of the cooling unit is also rated for 3 amps.

Do not share the circuit with another motor- or compressor-driven appliance such as a refrigerator, wine cooler, air conditioner or garage door opener.

We recommend using a surge protector rated for at least 15 amps to protect the cooling unit from power surges.

If an extension cord is necessary, use a grounded cord with 14-gauge wire or heavier, and keep it as short as possible.

FLOOR & WEIGHT REQUIREMENTS

A fully loaded wine cabinet is extremely heavy. Make sure the floor can support the combined weight of the cabinet and wine.

The cabinet should also be placed on a hard, level surface. On thick carpeting, the cabinet may settle unevenly over time, which can affect door alignment.

If installing on thick carpet, place a carpet board beneath the cabinet. You may purchase one from Le Cache or have a local hardware store cut a 3/4-inch plywood board to the width x depth of the cabinet.

DOOR SWING CLEARANCE

When opened to 90 degrees, the doors extend approximately 1 inch beyond the width of the cabinet.

For cabinets without moldings, allow for this additional space when planning the installation. The extra clearance is required in front of the cabinet for the doors to open fully.

Bottle Capacity

BOTTLE CAPACITY
Bottle Capacity
ModelRowsColumnsRackedBulkTotal
140014616012172
240016825630286
3100161032048368
3800171240850458
5200171654478622
Credenza - Contemporary8
5
6
9
9322115
Credenza - Euro & Mission7
5
5
8
15030180

Please note:
(1) We count the top of the racks as 1 row when counting rows in our racks.
(2) Every slot in the racks is 3 3/4" and sized to fit oversized Burgundy and most Champagne-size bottles.
(3) Bulk storage is located atop the racks (except for the first row atop the racks). Bulk storage capacity is based on Bordeaux-size bottles.
(4) Total capacity is the sum of racked plus bulk capacity, with double-deep storage in all cases except the Contemporary Credenza (which is single-deep). Usable capacity may be lower by 2-3 bottles when the first few cells under the cooling unit are left empty for proper air circulation.

FAQs

Can the Le Cache Contemporary 5200 be placed flush against a wall, or does it need rear clearance?

A: Yes — the 5200 uses Le Cache’s SB/0™ Technology, which routes exhaust through a top vent rather than the back of the unit. That means the cabinet can sit flush against a wall with no rear clearance required. The overall footprint is 74" wide x 29" deep x 86" tall, so plan your space around those dimensions and allow adequate overhead clearance for the top-vent exhaust to dissipate heat properly.

What is the actual bottle capacity, and will it fit larger-format bottles like Burgundy or Bordeaux?

A: Total rated capacity is 622 bottles: 544 racked slots at 3.8-inch spacing plus approximately 78 bottles in bulk stacking space. The all-wood interlock racks use universal sizing that accommodates oversized bottles, including the wider shoulders of Burgundy-style bottles. If your collection runs heavily toward large-format or heavy Burgundy bottles, expect usable racked capacity to run somewhat below the 544-slot number.

Does the 5200 offer dual-zone temperature control for storing reds and whites at different temperatures?

A: No — the 5200 is a single-zone cabinet. It maintains one temperature throughout the interior, making it best suited for a cellar-temperature collection (typically 55–58°F) rather than simultaneous storage of reds and whites at their respective serving temperatures. The CellarPro cooling unit includes an electronic thermostat with digital display and adjustable humidity control, but all 622 bottles share the same environment.

What are the electrical requirements, and can it run on a standard household circuit?

A: The cabinet runs on 115V AC / 60 Hz, standard US household current. Startup (inrush) amperage is the key figure to check against your circuit: the CellarPro 1800QTL-ECX draws 14.2 startup amps, the 1800QT-ECX draws 20.1 amps and the 1800XT-ECX also draws 20.1 startup amps. A dedicated 20-amp circuit is strongly recommended for the QT and XT units. Running amps once the compressor is up are much lower: 2.4, 2.9 and 3.0 amps respectively.

What does the warranty cover, and how long does it last?

A: Le Cache provides a 2-year warranty on the entire cabinet and a separate 5-year warranty specifically on the CellarPro cooling unit. An optional extended warranty is also available for purchase. The cooling unit warranty being longer than the cabinet warranty reflects where long-term mechanical risk typically lies — the compressor-based refrigeration system rather than the wood cabinet structure.

How is this different from a wine cooler or refrigerator for long-term aging?

A: Wine coolers and refrigerators actively dehumidify the air, which over time dries out corks and accelerates oxidation — making them unsuitable for aging wine beyond a few years. The Le Cache 5200 includes adjustable humidity control to maintain proper cellar humidity alongside temperature, foil-backed polyisocyanurate insulation for thermal stability and double-pane tinted glass for UV protection. These features combined make it a true long-term aging environment, not just a chilling appliance.

Video

Prop 65 Warning

This product can expose you to chemicals including lead, flame retardants or formaldehyde, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.

Ratings & Reviews

1 Review

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews

Bertha saves the day

Chris| 8/8/2023 12:57 pm

We bought this big boy (what my spouse and daughter refer to as Bertha) when we moved to Pleasant Hill from San Ramon. I had a wine cellar since we lived on the side of a hill, but lost it with the move. I needed a unit to store my 500 bottles. We bought "Bertha." With the warmer weather the refrig is running much of the time during the day when inside temp in the house is 78 degrees. I am not sure how they count to 622 bottles because I count 536 regular space provided. The new modern greyish color goes well with our decor. I am pleased with my purchase, but I have only had it for a month. So far so good.