CP 1800 Drain Line REAR + Heating Element #1709
Strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 110V power and/or when the drain line cannot be used. This item MUST be factory-installed - it cannot be retrofitted in the field.
Strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 110V power and/or when the drain line cannot be used. This item MUST be factory-installed - it cannot be retrofitted in the field.
- 100W internal heating element
- Works in 110V environments
- 1/2-inch ID condensate fitting
- 8-foot drain line
Condensate Drain Line + Heating Element CellarPro 1800 (P/N 1709). When the wine cooling unit will be installed in a wine cellar with hot, humid conditions, our 100W heating element is designed to burn off excess moisture. In addition, the 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the rear of the cooling unit.
Please note: This item will work only in 110V environments. For 220V environments, choose our drain line + heating element for 220V environments.
