FREE SHIPPING OVER $99*
Studio 1200 Double Stainless 332 Bottle #36772
Details
When a single-column cooler no longer keeps pace with a collection spanning Bordeaux, Burgundy and Napa, the Studio 1200 Double gives you two full-height, independently controlled single-zone units in one front-ducted package that reads as a single installation. Each side holds up to 166 Bordeaux-size bottles on sliding wire shelves wide enough for larger Burgundy formats, and the center-hinged doors open outward so access to either column doesn't require reaching past the other. The stainless steel exterior has a fingerprint-proof coating and reversible hinges, the glass is double-pane, tinted and tempered, and the front-ducted design means you can drop this into a built-in cabinet recess or run it freestanding without a gap behind the unit.
Best For
- Transitioning a 200–300 bottle collection out of a makeshift closet or undercounter cooler into a dedicated, properly conditioned space
- Running reds and whites at separate temperatures in the same footprint — one side at cellar temp, the other ready to serve
- A basement finishing or dining room remodel where built-in compatibility and a clean stainless face matter as much as capacity
- Buying two Studio 1200 units together and saving $100 over purchasing them separately
Configuration
Placement requirements: 60-85F ambient temperature. If the ambient temperature is outside this range, the performance of the unit will be affected.
Size: 23 3/4w x 27d (without handle) 29 1/2d (with handle) x 69 3/4h (in)
Shelving: 30 pull-out shelves (26 rolling)
Quiet Mode The wine cooler can be put into "quiet mode", which reduces the fan speed by 20-25% and reduces the amount of noise produced by the fans, by pressing and holding the light button (while the display panel is locked from not being touched for 15 seconds) for about 3-5 seconds. The C/F indicator will flash when the unit is in "quiet mode."
Compare Upright Wine Coolers - Loft, Avanti, Danby, N'Finity, Vinotemp
Features
- Two independently controlled single-zone compartments: Each 166-bottle side sets and holds its own temperature, so you can run one side for long-term aging and the other at serving temperature without compromise.
- 332-bottle capacity is based on standard Bordeaux bottles - Burgundy, Pinot Noir and other wider formats will reduce that count. The sliding wire shelves with wood trim accommodate both shapes without shelf swaps.
- Front-ducted ventilation means the unit exhausts from the front grille, not the rear or sides. This makes true built-in installation possible without requiring clearance behind the cabinet.
- Requires a 15-amp dedicated circuit per side (115V / 60Hz). Two separate circuits are needed for this double configuration - factor this into any remodel or rough-in work.
- R600a compressor refrigerant: This isobutane-based refrigerant runs at lower pressures than older refrigerants, which translates to quieter operation and lower energy draw. The unit is CEC and DOE energy compliant.
- Double-pane, tinted and tempered door glass reduces UV transmission and provides a thermal buffer between the interior and ambient room temperature.
- Stainless steel doors include a fingerprint-resistant coating and reversible hinges, giving you flexibility on door swing direction during installation.
- Interior LED lighting, a security door lock and key are included on each unit. Temperature is displayed on a blue LCD panel inside the cooler with a choice of Fahrenheit or Celsius readout.
- UL / ETL listed. Purchasing both units as this bundled double saves $100 versus buying each side separately.
Specs & Resources
Brand: Studio
Size: 47 1/2w x 27d* x 69 3/4h (in)
*Not including the handle (2 1/2" D)
Weight: 333 lbs per side
Power/Rating:
115V / 60Hz; Requires 15-Amp Dedicated Circuit
Capacity: Up to 332 bottles (166 per side)
Warranty:
1-year warranty on parts and labor, and 5 years on the compressor
What These Specs Mean
- 15-Amp Dedicated Circuit: Each cabinet must be on its own breaker with no shared loads - installing this double unit requires two separate dedicated circuits, one per side.
- R600a Refrigerant: A hydrocarbon refrigerant used in the compressor system that runs more quietly and efficiently than older refrigerant types and carries a lower environmental impact rating.
Placement
PLACEMENT REQUIREMENTS
- This appliance is designed for free standing installation or can be recessed into cabinetry.
- The wine cellar should be placed in a location where the ambient temperature is between 60-85°F. If the ambient temperature is outside this range, the performance of the unit may be affected.
- Place your wine cellar on a flat, solid floor that is strong enough to support it when it is fully loaded. To level your wine cellar, adjust the front leveling leg at the bottom of the wine cellar.
- When moving your wine cellar, please do not incline it more than 45 degrees.
- Locate the wine cellar away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
- Avoid locating the unit in damp areas.
- Plug the wine cellar into a dedicated (for this appliance only), properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (grounding) prong from the power cord. Any questions concerning power and/or electrical grounding should be directed to a certified electrician or authorized product service center.
- Double units can share the same circuit.
