Studio 22-Bottle Wine Cooler Set of 2 #37460

SKU: 37460 Studio 200D Wine Cooler S/2
$1,090.00
On Backorder

In Stock Date: 10/14/2026

Details

Studio 22-Bottle Wine Cooler Set of 2 #37460. Display your bottles and maintain perfect serving temperatures in our single-zone compressor wine coolers.

Each cooler features:

  • 22-bottle capacity
  • 6 wire shelves with label-forward design (4 x 4 and 2 x 3)
  • Fits Bordeaux, Burgundy and Champagne in most slots
  • Temperature ranges from 41F to 68F
  • Touch digital temperature control
  • Low-noise, rear venting compressor cooling system
  • Frameless door with recessed finger pull
  • Dual-pane tempered glass with low-E film
  • Interior LED lighting
  • Right-hinge position (not reversible)
  • Security lock
  • Save $100 on set of 2 coolers

Size: 17 3/4w x 20 3/4d x 22 3/4h (in) per cooler

Features

Sourced and designed to fit in our Portoro credenzas, these coolers can also be used in standalone locations.

Each cooler features:

  • 22-bottle capacity
  • 6 wire shelves with label-forward design (4 x 4 and 2 x 3)
  • Fits Bordeaux, Burgundy and Champagne in most slots
  • Temperature ranges from 41F to 68F
  • Touch digital temperature control
  • Low-noise, rear venting compressor cooling system
  • Frameless door with recessed finger pull
  • Dual-pane tempered glass with low-E film
  • Interior LED lighting
  • Right-hinge position (not reversible)
  • Security lock
  • Save $100 on set of 2 coolers

Specs & Resources

Brand: Studio

UPC: 077757373817

Size: 17 3/4w x 20 3/4d x 22 3/4h (in) per cooler

Capacity: Up to 44 bottles (22 per cooler)

Material: Glass, Metal

Power/Rating:
115V / 60 Hz. R600a refrigerant. Requires 15-amp circuit.

Warranty:
1-year warranty on parts and labor.

Owner's Manual

What These Specs Mean

  • R600a refrigerant: An isobutane-based refrigerant used in high-efficiency compressor units; it runs quieter and consumes less energy than older refrigerant types.
  • 15-amp circuit required: The unit must connect to a dedicated 15-amp outlet - sharing a circuit with other appliances can cause tripped breakers or inconsistent temperature performance.

Placement

PLACEMENT REQUIREMENTS

  • This appliance is designed for free standing installation or can be recessed into cabinetry.
  • The wine cellar should be placed in a location where the ambient temperature is between 60-85°F. If the ambient temperature is outside this range, the performance of the unit may be affected.
  • Place your wine cellar on a flat, solid floor that is strong enough to support it when it is fully loaded. To level your wine cellar, adjust the front leveling leg at the bottom of the wine cellar.
  • When moving your wine cellar, please do not incline it more than 45 degrees.
  • Locate the wine cellar away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
  • Avoid locating the unit in damp areas.
  • Plug the wine cellar into a dedicated (for this appliance only), properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (grounding) prong from the power cord. Any questions concerning power and/or electrical grounding should be directed to a certified electrician or authorized product service center.

Prop 65 Warning

This product can expose you to chemicals including Lead, Cadmium, Mercury,Chromium, Polybrominated Biphenyls and 3,3'-Dichloro-4,4'-diamino-diphenyl Ether, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Ratings & Reviews

No reviews available

Be the first to Write a Review