FREE SHIPPING OVER $99*
Rogar Replacement Worm / Auger / Guide Slug #34305
Details
Rogar Replacement Worm / Auger / Guide Slug (P/N 34305). This replacement worm / auger / guide slug is designed for all Rogar Openers (sold separately).
Please note: many companies offer knockoffs products that look very similar to genuine Rogar products, and some even use our "Estate" brand name. To repair a non-Rogar opener, the best option is to contact the original merchant from whom you purchased your opener. If you try to use Rogar replacement parts to repair your non-Rogar opener, we cannot guarantee that our part(s) will work.
Features
Our genuine Rogar parts offer the finest quality and durability.
- Genuine Rogar worm/auger
- Genuine Rogar guide slug
Specs & Resources
Brand: Rogar
Size: 1/2w x 3 3/4d x 1/2h (in)
Weight: 0.05 lbs
Material: Metal, Plastic
Video
Ratings & Reviews
176 Reviews
One More time
Russ| 6/14/2022 3:59 pm
This part is a consumable, I can count on replacing a failed one every two years or so, with normal usage. I am grateful that replacement parts for this minor little piece are readily available, and always install and work properly the first time. But it would be nice if the design or material was improved to eliminate the repetitious failure mode. Everything else in the opener is reliable, so I have a stack of unused augers that came with the replacement slug. I would appreciate having the slug be a separate part.
Excellent Service
FRANK| 5/23/2022 5:43 am
The part works great, and the order was delivered promptly.
Should not have broken
Mac| 4/27/2022 6:52 am
Purchased the wine opener around a year ago. The old one broke after more that 10 years. This one only had around 100 bottles through it and broke. Probably now made in China.
Better design than original
George M. - | 3/30/2022 6:22 am
Part fit and worked properly. Apparently an upgraded design, replacing the original twisted-wire screw with a substantial formed twist auger. The original wire had bent and I couldn't straighten it correctly.
Worm/Auger Required Machining to Work
Gene - | 3/27/2022 8:12 am
This part did not work as received. The 2 stops (one on each side) on this part were too long and jammed into the brass housing not allowing the handle to move thru its full range. I had to machined off roughly 1/32 inch from each stop to make this part work. After machining, this part worked great.
Reply from IWA
Thank you - we’re sorry that the part wasn’t perfectly sized for your opener - we really recommend these parts exclusively for Rogar openers, and we don’t have parts nor expertise to support other brands.