Le Cache Contemp 1400 Classic #1041

• SB/0™ Zero-Clearance Placement: The top-vent exhaust system allows the cabinet to sit flush against a wall with no rear or side clearance required - a practical advantage when fitting a 72" tall unit into a finished room without dedicated alcove space.
• Foil-backed polyisocyanurate insulation: Higher R-value per inch than standard foam, which reduces thermal load on the compressor and contributes to quieter, less frequent compressor cycles in ambient conditions up to the rated thermal load.
• Double-pane tinted glass: Filters UV light to protect labels and wine from light degradation while still allowing the collection to be viewed without opening the door.
• Adjustable Humidity Control with Energy-Saver and Quick-Chill modes: The CellarPro unit manages both temperature and humidity actively - not just temperature - which matters for corks and long-term aging. Quick-Chill brings a new bottle down to serving temperature faster; Energy-Saver reduces compressor activity during stable ambient conditions.
• Universal all-wood interlock racks with 3.8" slots: The slot width accommodates oversized Burgundy and Champagne bottles alongside standard Bordeaux formats. Racks are all-wood, which avoids the vibration transfer that metal wire racks can introduce from the compressor.
• Audible and visual alarms notify of temperature excursions without requiring you to check a display - useful when the cabinet is in a less-trafficked room.
• Stainless bar pull with keyed security lock
• Low-heat interior LED lighting
• CellarPro cooling unit options: Choose between the 1800QT-HE and 1800XT-HE based on the room's thermal load. The 1800QT-HE is the quietest option. Review the Cooling Unit Selection Guide before ordering.

Pairs Well With

• The optional bottle probe accessory, which allows the CellarPro unit to monitor and display the actual temperature inside a bottle rather than air temperature - relevant if you are aging wines that require tight temperature precision over years.

Brand: Le Cache

UPC: 077757010415

Size: 31w x 29d x 72h (in)

Weight: 320 lbs

Capacity: 172 bottles
Double-Deep Storage
Racked Slots: 160 bottles (3 3/4-inch Slots)
Bulk Space: approximately 12 bottles (stacked)

Material: Cherry

Power/Rating:
115V AC / 60 Hz
Running / Startup Amps (compressor)
- CellarPro 1800QT-HE: 2.9 Amps / 20.1 Amps
- CellarPro 1800XT-HE: 3.0 Amps / 20.1 Amps
Thermal Load Calculations

Warranty:
2 Years (Cabinet) / 5 Years (Cooling Unit)
Optional Extended Warranty

What These Specs Mean

• Running vs. Startup Amps: Running amps reflect the unit's electrical draw during normal operation. Startup amps reflect the brief increase in current when the compressor starts. Refer to the cooling unit installation instructions for circuit requirements.
• Cooling Unit Options: The CellarPro 1800QT-HE is the quietest available option. Other compatible models provide additional cooling capacity for installations with higher thermal loads. Use the Cooling Unit Selection Guide to identify the correct model for the installation conditions.

Resources

• Owner's Manual
• Cooling Unit Selection Guide
• Placement Requirements
• Wine Cabinet Delivery & Inspection Instructions
• Wine Cabinet Filter: Top View
• Top View
• Adjustable Humidity Performance Chart
• Wine Cabinet Monthly Operating Cost
• Cooling Unit Sound Performance
• Interactive Product Demo
• Watch Product Video

PLACEMENT & VENTILATION

Before choosing a location for your Le Cache wine cabinet, make sure the installation meets the following requirements.

BASIC PLACEMENT REQUIREMENTS

• Power: Standard grounded outlet on a dedicated circuit
• Room Temperature: 50–95°F
• Floor: Hard, level surface capable of supporting the fully loaded cabinet
• Door Clearance: Allow approximately 1 inch of additional width in front of the cabinet for the doors to open 90°
• Ventilation: Requirements vary depending on the cabinet and cooling configuration

VENTILATION REQUIREMENTS

Proper ventilation is essential. The cooling unit exhausts warm air, which must be able to dissipate without being drawn back into the unit. Poor ventilation can prevent the cabinet from reaching the desired temperature and may cause the cooling unit to overheat or run continuously.

SUMMARY

1. UPRIGHT CABINET / TOP-VENTED

Our upright wine cabinets with top-vented cooling are designed so the cabinet can be placed directly against the rear wall.

Warm air exhausts through the top of the cabinet, while return air enters from above. Sufficient clearance above and around the cabinet is therefore required.

Minimum clearance above the cabinet:

• 18 inches: Contemporary, Carolina, Loft, Vault and Semi-Custom wine cabinets
• 12 inches: European Country, Mission and Gallery wine cabinets

Important: The sides of the cabinet must remain open so that warm air can dissipate. Top-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

2. UPRIGHT CABINET / REAR-VENTED

Upright wine cabinets can also be configured with rear-vented cooling, with return air entering from behind the cabinet. This configuration is useful when sufficient clearance above the cabinet is not available.

Requirements:

• The cabinet must be positioned 3–4 inches away from the rear wall.
• If the rear of the cabinet is not accessible, allow at least 7 1/2 inches above the cabinet so the cooling-unit air filter can be removed and replaced.
• If the rear of the cabinet is accessible, allow at least 3 inches above the cabinet for airflow. We also recommend an air deflector to direct warm exhaust air to the left of the cabinet.

Important: The sides of the cabinet must remain open. Rear-vented upright cabinets should not be placed in a corner, enclosed space, alcove or closet unless a Front-Vent Hood is used.

3. UPRIGHT CABINET / TOP-VENTED + FRONT-VENT HOOD

A Front-Vent Hood can be added to a top-vented upright cabinet when:

• The cabinet will be placed flush against the rear wall but does not have the required clearance above for a standard top-vented installation
• The cabinet will be installed in an alcove, closet or other enclosed space

Allow at least 7 1/2 inches above the cabinet for removal of the hood and air filter.

Compatibility:

• Contemporary, Loft and Vault: The Front-Vent Hood may be used with or without the decorative grille.
• European Country, Mission, Carolina and Gallery: The Front-Vent Hood may be used without the decorative grille. The grille will not fit with the crown moldings.

4. CREDENZA

Credenzas do not require clearance above the cabinet; however, because both intake and exhaust ventilation occur behind the cabinet, credenzas require 3–4 inches of clearance behind the cabinet, and the sides must remain open for proper ventilation.

POWER REQUIREMENTS

The cooling unit plugs into a standard grounded wall outlet. The power cord extends approximately 6 1/2 feet from the rear of the cabinet.

The outlet must be on a dedicated circuit. The cooling unit components draw 3 amps, and the electrical outlet on the side of the cooling unit is also rated for 3 amps.

Do not share the circuit with another motor- or compressor-driven appliance such as a refrigerator, wine cooler, air conditioner or garage door opener.

We recommend using a surge protector rated for at least 15 amps to protect the cooling unit from power surges.

If an extension cord is necessary, use a grounded cord with 14-gauge wire or heavier, and keep it as short as possible.

FLOOR & WEIGHT REQUIREMENTS

A fully loaded wine cabinet is extremely heavy. Make sure the floor can support the combined weight of the cabinet and wine.

The cabinet should also be placed on a hard, level surface. On thick carpeting, the cabinet may settle unevenly over time, which can affect door alignment.

If installing on thick carpet, place a carpet board beneath the cabinet. You may purchase one from Le Cache or have a local hardware store cut a 3/4-inch plywood board to the width x depth of the cabinet.

DOOR SWING CLEARANCE

When opened to 90 degrees, the doors extend approximately 1 inch beyond the width of the cabinet.

For cabinets without moldings, allow for this additional space when planning the installation. The extra clearance is required in front of the cabinet for the doors to open fully.

Can the Le Cache 1400 Classic sit flush against a wall, or does it need clearance behind it?

A: The 1400 Classic uses Le Cache's SB/0™ Technology, which routes exhaust through a top-vent system rather than out the back. That means the cabinet can be placed flush against a wall with no rear clearance required — a significant advantage for dining rooms, living spaces or finished basements where you don't want the unit jutting out. It is a freestanding cabinet, not a built-in, so no cabinetry surround or trim kit is needed.

What is the real-world bottle capacity, and will it fit large-format Burgundy or Champagne bottles?

A: Total rated capacity is 172 bottles: 160 slots in the all-wood interlock racking (slots are 3.8 inches wide) plus bulk space for approximately 12 additional bottles stacked. The universal racking is designed to accommodate oversized bottles, including larger-diameter Burgundy and Champagne formats that standard 3.375-inch slots can't handle. If your collection is heavily weighted toward those formats, real-world racked capacity will be somewhat lower than the 160-slot figure.

Which CellarPro cooling unit should I choose, and what are the electrical requirements?

A: The 1400 Classic is available with three CellarPro 1800-series units, all running on a standard 115V AC / 60 Hz outlet. The 1800QTL-ECX is the quietest option at 2.4 amps running / 14.2 amps startup. The 1800QT-ECX draws 2.9A running / 20.1A startup, and the 1800XT-ECX draws 3.0A running / 20.1A startup. For a living area or dining room installation where noise matters, the QTL is the right call. Le Cache provides a Thermal Load Calculations guide to help match the unit to your specific room conditions — ambient temperature and insulation levels in the installation space are the key variables.

How does the 1400 Classic manage humidity, and why does that matter for long-term aging?

A: Unlike wine coolers and standard refrigerators — which control temperature only and actively dry the air — the 1400 Classic includes adjustable humidity control built into the CellarPro system. Maintaining proper humidity (generally 50–70%) prevents corks from drying out, which is the primary failure mode for bottles stored more than a few years. The cabinet also uses foil-backed polyisocyanurate insulation, sealed seams and double-pane tinted glass to stabilize both temperature and humidity against ambient fluctuations. This is the core difference between a dedicated wine cabinet and a beverage cooler.

What does the warranty cover, and how long does it last?

A: The cabinet itself carries a 2-year warranty. The CellarPro cooling unit is warranted separately for 5 years. An optional extended warranty is also available. Given that the cooling unit is the highest-wear component, the 5-year coverage on that part specifically is meaningful for long-term ownership cost.

Is this cabinet appropriate for a space where noise would be noticeable, such as a dining room or home office?

A: It depends on which cooling unit you select. The CellarPro 1800QTL-ECX variant is the quietest of the three options at 2.4 amps running, and CellarPro publishes detailed sound performance data for all three units. The cabinet also runs Energy-Saver and Quick-Chill modes, and the compressor cycles rather than running continuously, so the unit is not producing noise at all times. For a dining room or open-plan space, specifying the QTL unit is strongly recommended.