FREE SHIPPING OVER $99*
Remote LED Display Kit Factory Installed #1603
Remote LED Display Kit Factory Installed (P/N 1603). Our wired remote LED display and connected power module replace the standard controller on the cooling unit, and allows the LED display to separated from the cooling unit and located inside or outside the cellar.
Features include:
- Connected via 10 feet of 18-gauge low voltage wiring*
- Can be installed anywhere that's convenient for you, inside or outside the wine cellar
- Provides all features and functionality of the standard controller
- Perfect for cooling units that will be installed in remote or hard-to-reach locations
- Kit requires both components - the LED display and the power module
- This kit must be ordered with the cooling unit and factory installed
- Includes a stainless steel wall mounting plate and screws
*If you'd like more than 10 feet of wire, let us know when you checkout in the "special instructions" field. We charge $0.50 per foot after the first 10 feet.
Please note:
- Neither variable speed fans nor the condensate evaporator (not available on all units) are controlled by the standard controller and the remote display/control kit
- The LED display panel has a red (not blue) display
- The Remote LED Display Kit replaces the standard controller of the cooling unit
- This item must be purchased at the same time as the cooling unit because it must be installed in the factory**
**If your cooling unit has already shipped, one of the retrofit kits must be purchased instead.
Refer to the Resources tab (below) for drawings and installation guides.
Remote control kit and wiring allows the control panel to be placed remotely, inside or outside the cellar, instead of on the face of the cooling unit.
- Wired kit allows the cooling unit's remote control to be installed anywhere
- Allows temperature display and fully-functional control
- Choice to have wiring exit from front or rear of cooling unit
- Includes 10-feet of 18-gauge low-voltage wiring
- Compatible with all CellarPro cooling units
Brand: CellarPro
UPC: 077757016035
Size: 2 3/4w x 1 1/4d x 1 1/4h (mounting) (in)
Weight: 0.75 lbs
Warranty:
1 Year
Cut Sheet for Remote Display Control [PDF]
Ratings & Reviews
18 Reviews
CellarPro 4000s Control
Easy to install, easier to use. Customer was very specific about the temp range he was looking for. This gives him total control to handle his collection how he chooses
Chris
4/10/2024
Good add on
Digital display lets you know cellar temperature at a glance.
Easy to install 2-wire communication,
Bob
7/12/2023
Set and forget
The unit works fine. One needs to read the directions to set the temp range. Once set haven’t touched in years.
Ken czarnecki -
2/21/2023
Wired Remote
The unit is easy to connect and install. The plate is a little too much maybe something smaller. We used a decorative switch plate with minor adjustment.
Taylor
2/27/2022
Works fine but spndy
I easily installed this display in a few minutes. It works fine but $250 is too much for this accessory. All the company does is remove the standard sending unit and add the wiring. The sending unit is ok in quality but they removed the standard one and charge too much for the replacement.
Reply from CellarPro
Thank you for your comments. Actually, the remote display is a completely different module than the standard controller. Although it seems like we've just separated the display and added wiring, what actually occurs inside the cooling unit is that the display and power module is entirely replaced by different components. The remote control components are much more expensive than the standard controller, hence the higher price.
David Johnson -
8/20/2024