CellarPro Filter + Frame Kit 1800/2000 #1368
When the filter becomes dirty, simply pull out the frame, replace the dirty filter with a clean one, and return the frame to the cooling unit. The fiber orientation and graduated density of this filter are designed to capture more dust and particles than other synthetic filters. The media is bonded with a fire retardent resin, and meets UL Class 2 flame retardance requirements.
If you already have the 1800 or 2000VSi Series magnetized filter frame, you don't need to purchase this item. Instead, reuse the frame and replace the filter with our Filter Replacement 2-Pack.
Clean coils and filters ensure that the cooling units operate at peak performance.
Additional replacement filters sold separately.
- Metal frame made from brushed aluminum
- Magnets hold the frame snugly in place
- Filter is made from 100% non-woven polyester
- Graduated density
- Contains no adhesives
- White on air entry side / blue on air exit side
- Flame retardant
- Compatible with 1800 Series and 2000VSi cooling units
Size: 13w x 9h x 1d (in)
Weight: 1 lbs
Ratings & Reviews
by Shirley -
This is my third Cellar Pro and the first time I've had the option of an external vent - makes it so easy to replace the filter and prolong the life of the unit. Each of my Cellar Pro units has improved in quality and I'm thrilled with their advances.
CellarPro Customer Service
I had a unique request about covering an exhaust vent. The representative researched the question and promptly replied after conferring with an engineer. His quick response was appreciated.
CellarPro Filter + Frame Kit
by Jay -
Easy to attach
I like how easy it was to attach !
The frame fits perfect. I like the fact that it mounts with magic.
Great idea to simplify cleaning.
by Greg Gurbach
This is a great addition to the chiller to make cleaning a snap. The frame fits perfectly over the inlet via magnets. Easy installation and makes the cleaning so much easier.
A perfect fit and does the job.
Nice to get extra protection for the chiller unit
by Mark S
Great idea for protecting the chiller unit. Fits perfect! Just buy and use it!
Dust is not a big issue in my location but I still vacuum the unit periodically. This kit "snapped" right in and covered everything perfectly. I bought two more filters and will have to see how long it is before I need to change it.
Just get it
Why buy a brand new, expensive cooling unit and let it pull in dusty dirty air? Easy to install magnetically, and to my surprise, does not seem to impair the cfm at all, air goes right through it as it if it wasn't there.
CellarPro Air Filter
by Daryl -
Great product, easy to use.
Why didn't someone else think of this?
by John M
Knowing that I can now skip my quarterly maintenance of dragging the vacuum over to clean out my old Breezeaire (which this unit replaced), having this quick and easy filter system is a real bonus. The magnets worked great in my installation - no problem with keeping things attached, and the fit was perfect.
Very easy to install and fits perfectly. No attachment issues.
Great addition but magnets need improvment
by Mike M -
The filter system fits perfectly, but the magnets don't keep the filter affixed all the time. The size and coverage is perfect, but had to use a little duck tape to make sure filter stays in place.
by Chris -
Amazing! The ease of installation and filter replacement is great.
Filter holder review
This is a nice design, especially since it is much easier to replace the filter instead of vacuuming since the wine cooler is fairly close to the wall and can not be moved.
I couldn't believe how fine the dust was that the filter held inside.
I will continue to change filters now that I have seen how much dust they hold.
by David S.
Basic, easy design. Had to always clean the coils of my Breezaire 1060...not with this filter.
CellarPro Filter Review
So far so good
by K. Taga
So far so good. We put a wine room in our basement.
Filter on back
by Antony Francis
I have removed this filter for the summer ... the airflow is reduced by the filter and the unit was not cooling as much (it is 90+ degrees in my garage!)... as soon as I removed it, the cooling improved and it is working perfectly ... i'll put it back on in the fall. (and yes, I am using the air deflector)
by Edward Matuga
Too early to tell how good it will be.It did attach as promised very easily.
by C. Sapienza II (SCS Construction Services)
Simplistic design makes things a lot easier. No mechanical fasteners make it easy for anyone to maintain their cooling unit.
by David Lynn
The filter is ok if you are using your cooler in a area with no dust, I built my cellar in my shop so this was a total waste
Simple but effective
by J. Bordelon
Purchased this filter after fighting to manually clean coils on my old cooling units. Idea is simple and it works well.