Free Ground Shipping!

Exclusively for our retail customers, we offer free shipping on most in-stock items that ship via FedEx Ground within the continental U.S. Requires a minimum order of $50. Excludes palletized items that ship on a truck via curbside or inside delivery, wine cooling units, WineKeeper products, oversized items, on-sale items, and items that ship directly from the manufacturer. May not be combined with other coupons, discounts or offers.

Please use promo code IWASHIPFREE at checkout.
Look for our "Free Shipping" burst (shown at right) on items that qualify for free shipping. If the burst is not shown on an item, it does not qualify for free shipping.

FedEx Ground Shipping Timing Map

Information Center > Wine Cooling Units by Type > Split Cooling Systems > 

Enlarge Image

CellarPro Air Handler Split 6500 Outdoor, #7084

Designed for wine cellars up to 1750 cubic feet, CellarPro's Air Handler 6500Sx split refrigeration system provides ducted refrigeration specifically designed for wine cellars, and allows the noise from the evaporator and condensing units to be removed from living areas.

CellarPro Air Handler Split 6500 Outdoor (P/N AH6500Sx). Our high-performance Air Handlers are designed to handle environments ranging from The condensing unit includes outdoor louvered grills and can be placed outdoors. Exposure on the condenser side to temperatures below 20°F require our fan cycling switch ($99). The evaporator cannot be exposed to freezing temperatures.

CellarPro Air Handler split refrigeration systems can be ducted up to a total of 100 equivalent feet (supply and return), and the evaporator and condensing units can be separated up to 100 feet.

With our split configuration, the evaporator and condensing units can be located in separate locations and connected via a refrigerant line-set (sold separately) and power line (optional).

CellarPro Air Handler evaporator and condensing units both use variable-speed centrifugal fans with three settings, including a "high" setting for maximum performance and a "low" setting for super-quiet operation. CellarPro AH6500S Air Handler evaporator produce 51 decibels and the condensing units produce 57 decibels (ducted at the medium fan speed).

When NOT ducted, our evaporator and condenser require 12 inches of unobstructed space and approx. 600-700 CFM of ventilation when installed in a confined space.

CellarPro's horizontal configuration allows multiple ducting alternatives, as follows.

  • Collars or grills for EXHAUST (ie Supply) are located at the front (shown at left), top or rear of the cooling system, and are interchangeable to meet your specific requirement.
  • Collars or grills for INTAKE (ie Return) are located at each end (left: evaporator, and right: condenser), and include professional-grade air filters to protect the unit.
A bottle probe temperature sensor (10' cord) plus your choice of duct collars, indoor grills and blank plates is included in the price of the cooling system.

CellarPro Air Handler Split systems offer a choice of 110V / 60Hz wiring and power configurations:
  1. Two plug-in power cords for the evaporator (5.7 amps / 15 amp circuit breaker) and the condensing unit (11.2 amps / 20 amp circuit breaker). This wiring configuration can be used with either Valve Control or Electronic Control.
  2. Two permanent power connections for the evaporator (3.6 amps / 15 amp circuit breaker) and the condensing unit (16.7 amps / 25 amp circuit breaker). This wiring configuration can be used with either Valve Control or Electronic Control.
  3. One permanent power connection for the entire system (25 amp circuit breaker). In this configuration, the condensing unit must be wired to the evaporator, and must be used with Electronic Control.
CellarPro Air Handlers can be configured to include a factory-installed humidification system and a heating system for low ambient conditions (additional cost).

Important Notes: For exposure to environments below 20°F, in addition to the compressor heater, our fan cycling switch is required.

Capacity: Wine Cellars up to 1750 cubic feet with proper insulation and a moisture barrier. More info...

Ducting of cold supply/return air will result in additional heat loss and loss of cooling unit efficiency. Please use our ducting heat loss table and our duct correction table when sizing the cooling unit.

Shipping: We charge a flat-rate of $195 to ship these units anywhere in the continental U.S. via common carrier, strapped to a pallet, with curbside delivery.

  • Up to 1750 Cu. Ft. Capacity
  • Can be Ducted up to 100 Equivalent Feet (50 Feet per Duct)
  • Can be Configured to operate in environments ranging from -20°F to 110°F
  • For temperatures below 40, our compressor heater is required, and for temperatures below 20°F, our compressor heater AND fan cycling switch are required.
  • Schraeder Valve for Refrigerant Charge (R134A) and Superheat Adjustment
  • Multiple Knock-Outs and Access Points
  • Expansion Valve and Liquid Line Solenoid Valve (optional) come Factory Installed
  • Choice of Electronic or Valve Control for Condensing Unit
  • Evaporator and Condensing Unit are Factory Pressurized and Shipped with Dry Nitrogen
  • High-Performance Condensing Unit
  • Variable Speed Fans
  • Oversized Coated Evaporator Coils
  • Optional Humidification System via Digital Display
  • Optional Heating System for adding Heat to the Wine Cellar
  • 1/2" ID Drain Line
  • 47/52 Decibels at Low Fan Speed (Ducted Evaporator/Condensing Unit)
  • Electronic Thermostat, Digital LED Display and Audible/Visual Alarms
  • Auto-Defrost Cycle
  • Sight Glass and Liquid Line Filter/Drier (shipped loose)
  • Oversized Receiver for Long Line Sets
  • Line-sets can run up to 100 equivalent feet (and up to 30 vertical feet)
  • Auto Reset High Pressure Switch
  • Compatible with a Dedicated 25-Amp Circuit
  • Includes Bottle Probe with 10' Cord
  • Optional Remote Control Display
  • ETL Tested and Certified (UL Standards)

RRP: $4,495.00 You Save: $

Our Price: $4,495.00

Availability: In Stock / Ships 2 Weeks

You must be logged in to add items to your Wishlist, Click here to login.

New customer? Click here to register

  • Schraeder Valve for Refrigerant Charge
  • Electronic or Valve Control
  • Oversized Coated Evaporator Coils
  • 47/52 Decibels at Low Fan Speed
  • Auto-Defrost Cycle
  • Line-sets can run up to 100 equivalent feet
  • Includes Bottle Probe with 10' Cord
  • ETL Tested and Certified (UL Standards)
  • Condition:Brand New
  • Capacity:1750
  • Size:18.6w x 18.6d x 19.3h (in)
  • Weight:171 lb
  • Power/Rating:115V AC / 60 Hz
    Evaporator Dimensions:
    - 60 lbs (no humidifier)
    - 18.6w x 18.6d x 19.3h
    Condensing Unit Dimensions:
    - 111 lbs
    - 18.6w x 18.6d x 19.3h
    - Startup Amps: 53.0 Amps
    - Running Amps Cord-Connected: 17.1 Amps
    - Total Watts: 1274 (low fan speed)
    BTUH @ 55F
    - Low Fan Speed: 4923
    - Med Fan Speed: 5350
    - High Fan Speed: 5771l
    Evaporator Decibels
    - Low Fan Speed, Ducted: 47 dbA
    - Med Fan Speed, Ducted: 51 dbA
    - High Fan Speed, Ducted: 59 dbA
    Condensing Unit Decibels
    - Low Fan Speed, Ducted / Non-Ducted: 52 dbA / 65 dbA
    - Med Fan Speed, Ducted / Non-Ducted: 57 dbA / 70 dbA
    - High Fan Speed, Ducted / Non-Ducted: 62 dbA / 75 dbA
  • Warranty:2 Years (Entire System) / 5 Years (Compressor)
  • SKU:AH6500Sx
  • UPC:noinfofound